Mr Mok,20 over experience in repairing spalling concrete.
Repairing spalling concrete
Step1: Remove the spalled concrete. Remove the concrete at the spalled areas to expose the corroded steel bars,
Step 2: Clean and paint the corroded steel bars. Scrape and clean the exposed steel bars and use a wire brush to remove any rust,apply 2 coats of anti-rust paint to the steel bars,
Step 3: Patch the knocked out area,using polymer modified cement mortar.
Concrete wall and slab are everywhere, it is very essential elements for the whole building, maintain it to make sure defects are identified and repaired is extremely important before it causes further structural or other linked problems. Those defects that we need to pay attention to learn and fix it will be listed here today for all of you.
We possess with many years of experience and exquisite materials,the plaster wall and ceiling master with delicate hand-made heads. Created ideal home feelings and various plaster designs for homeowners, shopkeepers,designers and Contractors.
Created an ideal home feel and a variety of plaster design,Fake wall screen / partition / compartment and so on.
The repair project is also one of our strengths.Without delicate handwork, the light shines like a spray,and the beauty is insufficient.
Welcome to call and make an appointment.
We are dealing in all kind of Rapair work and House Extension work such as Plaster Ceiling, Tiling work, Counter Top, Painting.
Outdoor concrete repair
Indoor concrete repair
Wall and ceiling repairing cost estimate:$220to$350 first spot and an additional cost of $50 for the following spot.
Work Includes spalling repair and painting back.
Note: We don't plaster directly on tiles,is highly not recommended.
Wall that has gone through long aging process will experience portion that is damaged by water leaking, scratches, other potential external forces and internal wall quality issue.Leng team will need to make sure the holes, deep scratches are being filled up before applying two layers of skim coat compounds. Then and there, surfaces will be treated with sanding before any wallpaper or paint applied on it, right after the coat dries and has become smooth.
Plastering supplier usually supply plaster material that comprises of lime, gypsum, cement or some other components. Although manufactured finished goods will be presented in the form of dry powder, water is key to the mixture before it forms a stiffer paste that has high workability, but application must be done as soon as possible in order to prevent it from hardening. The reason why plastering contractor will mix the compound with water is because of crystallization process that releases the heat which then makes hardening of hydrated plaster.
​